Oxygen Mask Mould-How To Use Medical Oxygen Mask


The medical oxygen-absorbing mask is simple to use, and […]

The medical oxygen-absorbing mask is simple to use, and its basic structure is composed of a mask body, an adapter, a nose clip, an oxygen supply tube, an oxygen supply tube pair, and an elastic band. (Full face mask). How to use medical oxygen mask correctly?

1.Prepare the necessary items needed for the oxygen-absorbing mask and check it repeatedly to avoid omissions. Check the bed number and name carefully, clean your face and hands before operation, wear a mask, clean your personal clothing, and prevent wearing items from falling off.

2.Before operation, check the bed number repeatedly. After the inspection, install the oxygen meter and test whether it is smooth. Install the oxygen core, install the humidification bottle, check whether the equipment is stable and the working condition is good.

3.Check whether the date of the oxygen pipe is within the warranty period. Check for signs of air leakage to ensure that the working status of the oxygen suction tube is intact. Connect the oxygen suction tube and the humidification bottle to ensure a stable connection, and at the same time turn on the switch to adjust the oxygen flow.

4.Check the oxygen tube again to see if it is smooth and free of leaks. Check for moisture at the end of the oxygen tube, and wipe off any water droplets in time.

5.Connect the oxygen tube and the head mask, and ensure that the connection is in good condition to ensure that there will be no problems in the working state. After checking for correctness, wear an oxygen mask. The top cover should be adjusted for tightness and nose clip comfort.

6.After putting on the oxygen mask, record the time and flow rate of oxygen in a timely manner, carefully patrol back and forth, observe the status of oxygen inhalation, whether there is any abnormal performance.

7.After the oxygen use time reaches the standard, stop using oxygen in time, carefully remove the mask, turn off the flow meter in time, and record the time of stopping oxygen use.


Yuhuan Shengjiu Mould Co., Ltd. has many years of experience in the design and production of   Oxygen Mask Mould   . We can provide higher engineering design and production efficiency. It is a professional oxygen mask manufacturer and oxygen mask supplier in China. Welcome to consult and purchase: