news

About Three Way Stopcock For Medical Use

Update:22-06-2020
Abst:

Transparent appearance, increase the safety of infusion […]

Transparent appearance, increase the safety of infusion, and help to observe the exhaust situation;

 

Easy to operate, can rotate 360 ​​degrees, the arrow indicates the flow direction;

 

Does not interrupt fluid flow during conversion, does not produce vortex, and reduces thrombosis

 

 

The medical Three Way Stopcock is composed of a three-way pipe, a one-way valve and an elastic plug. The one-way valve is connected to the upper and side ends of the three-way pipe, and the one-way valve is made at the upper end of the three-way pipe The side cover of the lower cover and the three-way pipe is provided with a valve upper cover of a one-way valve, and an elastic plug is connected to the lower end.

 

In clinical work, in order to achieve the purpose of rapid treatment, it is often necessary to open two venous channels for patients. When faced with the elderly and patients who are repeatedly hospitalized many times at work, and the patients have poor blood vessels, multiple venous punctures in a short time not only increase the patient's pain, but also cause congestion at the puncture site. Many elderly patients with superficial vein indwelling needles are not easy to indwell, but they cannot do deep vein catheterization. In view of this, three-way catheters are used clinically.

 

 

Separate the infusion tube and scalp needle before venipuncture, connect the three-way tube, the scalp needle is connected to the main channel of the three-way tube, and the other two interfaces of the three-way tube are connected to the nipples of two infusion sets respectively, and puncture after exhausting the air. Fix it well and adjust the drip rate as needed.

 

 

The use of Three Way Stopcock has the advantages of simple operation, safe use, fast and simple, one person can operate, no leakage of chemical liquid, closed operation, less pollution and so on.

 

 

Yuhuan Shengjiu Mould Co., Ltd. is a professional China manufacturer and supplier of  Three Way Stopcock    and   Safety Needle Mould   . Our Three Way Stopcock   can be used for multi-channel and multi-infusion therapy, and the rotation is flexible and unlimited. Choose our products, so that you have no worries during use, welcome to buy: http://www.medicalmould.net/product/transfusion-bloodset-mould/stopcocks-mould/

0