A syringe push rod forming mould includes a fixed mould component and a movable mould component. A component profile is set between an upper mould of the fixed mould component and a lower mould of the movable mould component, and a plurality of push rod cavities are provided on the parting surface. It is characterized in that: two sets of positioning components are provided at the parting surface of the upper mould and the lower mould, and the two sets of positioning components are respectively located at the front and rear ends of the upper mould and the lower mould, and one end of the upper mould and the lower mould is provided with a clamping block. The compression block presses the upper mould and the lower mould in the axial direction of the pusher cavity.The upper and lower moulds are provided with beading at both ends in the radial direction of the pusher cavity. Press the upper and lower dies in the direction. After the above structure is adopted: the setting of the clamping block and the bead makes the upper mould and the lower mould aligned to ensure that the forming pusher is in good position, and the upper and lower moulds set the position components at the parting surface of the upper and lower moulds to prevent the two sides from rowing. The pusher cavity of the cloth moves the fixed mould, and the setting of the cavity insert makes the opening of the mould easier.

The syringe push rod is provided with a convex edge at the tail end of the push rod for easy operation during injection. It is characterized in that the front end of the push rod of the product is provided with a push rod head that cooperates with the inside of the syringe cylinder. The push rod of the product is transparent The putter head of the product is an outer cover made of dark-colored soft rubber that is integrally installed at the end of the putter or integrated with the putter and is covered with dark-colored soft rubber on the outside. The syringe pusher of this product adopts a two-layer structure, which is closely fitted to each other without displacement, and the pusher body is transparent and the outer cover is dark, which is convenient for processing and also ensures the light-proof during the dispensing process. The problem makes the operation very convenient, the assembly is simple and convenient, and the application prospect is very good.

As people pay more and more attention to health, the market demand for    Syringe Mould    is growing. Yuhuan Shengjiu Mould Co., Ltd. specializes in manufacturing and supplying high-quality syringe mould products in China with its superb technology. Welcome to consult and buy: http://www.medicalmould.net/